OPEKS condensate pumping stations on electric pumps
OPEKS ENERGOSYSTEMY has designed, manufactured and installed a condensate pumping station on electric pumps. The condensate pumping station is designed to return the condensate back to the boiler room. It is used in cases where the condensate's own pressure is not enough to reach the boiler room or when it is necessary to separate the consumer and the condensate line.
The station includes a tank for collecting condensate, WILO electric pumps, an automation cabinet with a controller that regulates the level of condensate in the tank. The automation system provides for automatic changeover of pumps "working / standby", protection against "dry running", protection of pump electric motors, transmission of a signal to the dispatching system in the event of a "dry contact".
Individual heating station of the heating system according to an independent connection scheme
Centrifugal steam separator OPEKS-1-SC16-1-F50
Float steam trap Yoshitake TSF-8-5 DN15
Reducing valve for steam Yoshitake GP-1000EN DN50 А/0.05-0.9MPa
Reducing valve for steam Yoshitake GP-1000EN DN40 А/0.05-0.9MPa
Float steam trap Yoshitake TSF-8-5 DN25
Reducing valve for steam Yoshitake GP-1000EN DN32 А/0.05-0.9MPa
Reducing valve for steam Yoshitake GP-1000EN DN15 А/0.05-0.9MPa
Plate heat exchanger THERMAKS РТА (GC)-16
Reducing valve for steam Yoshitake GP-1000EN DN25 А/0.05-0.9MPa
Reducing valve for steam Yoshitake GP-1000EN DN65 А/0.05-0.9MPa
Reducing valve for steam Yoshitake GP-1000EN DN100 А/0.05-0.9MPa
Reducing valve for steam Yoshitake GP-2000EN DN25 B/0.1-1.4MPa
Reducing valve for steam Yoshitake GP-2000EN DN50 B/0.1-1.4MPa
Brazed heat exchanger SWEP B25T
Brazed heat exchanger SWEP B25THx20
Reducing valve for steam Yoshitake GP-1000EN
Float steam trap Yoshitake TSF-10F-10 DN15
Shell and tube coolers
Safety valve LESER 441/442
