Specifications
Parameter name | Meaning |
---|---|
Temperature graph in the primary circuit (heating system, boiler room), ºC | 150/70; 130/70; 110/70; another |
Temperature graph in the secondary circuit (heating system), ºC | 95/70; 90/70; another |
Conditional pressure in the primary circuit, MPa | 1.0; 1.6; 2.5 |
Conditional pressure in the secondary circuit, MPa | 0.6; 1.0; 1.6; 2.5 |
power, kWt | 20 ... 10000 |
Connection diameter, DN | 25 ... 400 |
Control cabinet | there is |
Frequency regulation by pump group | there is |
Heat exchanger design | plate collapsible design, manufactured by OPEKS / TRANTER, brazed construction by SWEP |
Pumps | WILO, GRUNDFOS, others |
Regulating automation | DANFOSS, ESBE, BELIMO, CLORIUS, others |
Piping material | Carbon steel |
Overall dimensions (roughly, depend on the design load) LxHxW, mm | (1000 ... 3000) x (1000 ... 2000) x (500 ... 1500) |
Non-standard execution | Possible upon request |
General information
The substation with dependent connection of the heating system is intended for automatic regulation of the water temperature in the heating system circuit according to the algorithm specified by the consumer, taking into account the weather correction.
An example of designation of a substation with dependent connection of a heating system produced by OPEX ENERGOSYSTEM:
MTP-OZ-M№-Q TU 29.2-31777170-001: 2006,
where:
- ОЗ - the purpose of the unit is for a heating system with a dependent connection;
- М№ - model number in the row of the heat exchanger;
- Q is the estimated thermal power of the heat point, kW.
Functional diagram
- Pickup from a warehouse in Kiev
- New Mail - at the rates of the delivery service
- SAT - at the rates of the delivery service
- Deliveri - at the rates of the delivery service
- Cashless payment with VAT
- Online Privat24, Visa / MasterCard