New model of three-circuit SWEP brazed heat exchanger DPD700 series
The SWEP DPD700 series brazed heat exchanger is designed for efficient operation with R410A refrigerant in chillers and climate control systems. Its important advantage is the possibility of efficient heat exchange both at 100% load with 2 compressors and at 50% load in operation with only one compressor.
The DPD700 evaporator can also be used as a condenser.
The SWEP heat exchanger is designed for high pressure systems up to 45 bar.
You can order any model of the SWEP brazed heat exchanger by contacting the technical department of OPEKS ENERGOSYSTEMY.
Dimensions (mm)
A 725
B 302
C 546
D 191
E 27.1
F 14 + 2.38xNP
G 0
I 207
M 532
O 4
F1 / P1 spigot: 62 mm
F2 / P2 spigot: 62 mm
F3 / P3 spigot: 28 mm
F4 / P4 spigot: 28 mm
F5 / P5 spigot: 90 mm
F6 / P6 spigot: 90 mm
Individual heating station of the heating system according to an independent connection scheme
Centrifugal steam separator OPEKS-1-SC16-1-F50
Float steam trap Yoshitake TSF-8-5 DN15
Reducing valve for steam Yoshitake GP-1000EN DN50 А/0.05-0.9MPa
Reducing valve for steam Yoshitake GP-1000EN DN40 А/0.05-0.9MPa
Float steam trap Yoshitake TSF-8-5 DN25
Reducing valve for steam Yoshitake GP-1000EN DN32 А/0.05-0.9MPa
Reducing valve for steam Yoshitake GP-1000EN DN15 А/0.05-0.9MPa
Plate heat exchanger THERMAKS РТА (GC)-16
Reducing valve for steam Yoshitake GP-1000EN DN25 А/0.05-0.9MPa
Reducing valve for steam Yoshitake GP-1000EN DN65 А/0.05-0.9MPa
Reducing valve for steam Yoshitake GP-1000EN DN100 А/0.05-0.9MPa
Reducing valve for steam Yoshitake GP-2000EN DN25 B/0.1-1.4MPa
Reducing valve for steam Yoshitake GP-2000EN DN50 B/0.1-1.4MPa
Brazed heat exchanger SWEP B25T
Brazed heat exchanger SWEP B25THx20
Reducing valve for steam Yoshitake GP-1000EN
Float steam trap Yoshitake TSF-10F-10 DN15
Shell and tube coolers
Safety valve LESER 441/442
