- Low leakage single seat valve.
- Smaller and lighter than other temperature controls.
- No additional adjustment tool is required, the regulator is equipped with a knob for setting the temperature.
- Exceptional precision thanks to a special stem packing that influences the opening / closing of the valve.
|Application||Heat||Steam, hot water|
|Heat. Wednesday||Cold and hot water, oil, other non-hazardous liquids|
|Max. pressure||Frame||0.5 MPa|
|Thermal valve||1.0 MPa|
|Max. temperature||180 ° C|
|Setting range temp.||For liquid||40-120 ° C|
|For air||40-120 ° C|
|Pace. surrounded Wednesday||Setting temperature -10 ° C or less|
|Valve seat||Stainless steel|
|Valve stem||Stainless steel|
|Thermo valve||For liquid||Stainless steel|
|For air||Stainless steel|
|Std. capillary length||2 m|
|Compound||Flange connection JIS 10K FF|
- Available with capillary tube up to 5 m.
- Low temperature heating options are available (15-35 ° C, 20-40 ° C, 35-55 ° C) for OB-6G.
- Available with sleeve (SUS304 or PTFE cap) for fluid.
Temperature setting range
|Setting range temp. (° C)||Maintained pace. (° C)|
|For liquid||For air|
- The term withstand temperature refers to the maximum temperature at which the bellows can withstand internal pressure.
- Options with a temperature control range of 30 ° C are available (only OB-6).
Dimensions (mm) and weight (kg)
|Nom. the size||L||H||The weight|
Equipment selection schedule
How to use a chart
If the inlet pressure (P1) is 0.4 MPa, the outlet pressure (P2) is 0.3 MPa, the flow rate is 80 kg / h, find the intersection point (a) of the lines P1 = 0.4 MPa and P2 = 0, 3 MPa. From this point (a) draw a line down to the intersection with the line corresponding to the flow rate of 80 kg / h - the point of intersection (b). Since this intersection point (b) lies between the nominal sizes 15A or 20A and 25A, select the larger one, 25A.
- Pickup from a warehouse in Kiev
- New Mail
- Courier in Kiev
- Cashless payment with VAT
- Online Privat24, Visa / MasterCard