Fact. dia. holes d 0 [mm] | 13 | 25 | ||||||
- | - | - | ||||||
- | - | - | Vessel wall thickness | Vessel wall thickness | ||||
- | - | - | ≤ 5mm | > 5 mm | ≤ 5mm | > 5 mm | ||
- | - | PN | 16 | 16 | 16 | 16 | ||
Flange thickness | WITH | [mm] | 12.0 | 12.0 | 12.0 | 12.0 | ||
C1 | [mm] | 5.0 | 18.0 | 5.0 | 18.0 | |||
Diameter | D | [mm] | 130.0 | 130.0 | 150.0 | 150.0 | ||
D1 | [mm] | 110.0 | 110.0 | 127.0 | 127.0 | |||
Bolt center circle | L | [mm] | 90.0 | 90.0 | 110.0 | 110.0 | ||
Welded connections | Input a (without connection to the vessel) | Output b | Input a (without connection to the vessel) | Output b | ||||
PN | 16 | 16 | 16 | 16 | ||||
Center to end face | - | [mm] | 24 | 80 | thirty | 90 | ||
Height - Н4 | H max . | [mm] | 201 | 289 | ||||
Height - H8 double piston design | H max. | [mm] | 229 | 296 | ||||
Clamp connections | Input a (without connection to the vessel) | Output b | Input a (without connection to the vessel) | Output b | ||||
PN | 16 | 16 | 16 | 16 | ||||
Center to end face | - | [mm] | 24 | 102 | thirty | 112 | ||
Height - Н4 | H max. | [mm] | 201 | 289 | ||||
Height - H8 double piston design | H max. | [mm] | 229 | 296 | ||||
Threaded connections | Input a (without connection to the vessel) | Output b | Input a (without connection to the vessel) | Output b | ||||
PN | 16 | 16 | 16 | 16 | ||||
Center to end face | - | [mm] | 24 | 120 | thirty | 130 | ||
Height - Н4 | H max. | [mm] | 201 | 289 | ||||
Height - H8 double piston design | H max. | [mm] | 229 | 296 | ||||
Flange connections | Input a (without connection to the vessel) | Output b | Input a (without connection to the vessel) | Output b | ||||
PN | 16 | 16 | 16 | 16 | ||||
Center to end face | - | [mm] | 24 | 126 | thirty | 134 | ||
Height - Н4 | H max. | [mm] | 201 | 289 | ||||
Height - H8 double piston design | H max. | [mm] | 229 | 296 | ||||
Weight | - | - | ||||||
Weight | - | Max. | [kg] | 3.0 | 4.0 |
Fact. dia. holes d 0 [mm] | 13 | 25 | ||||||
- | - | - | ||||||
- | - | - | Vessel wall thickness | Vessel wall thickness | ||||
- | - | - | ≤ 5mm | > 5 mm | ≤ 5mm | > 5 mm | ||
Flange thickness | WITH | [mm] | 12.0 | 12.0 | 12.0 | 12.0 | ||
C1 | [mm] | 5.0 | 18.0 | 5.0 | 18.0 | |||
Diameter | D | [mm] | 130.0 | 130.0 | 150.0 | 150.0 | ||
D1 | [mm] | 110.0 | 110.0 | 127.0 | 127.0 | |||
Bolt center circle | L | [mm] | 90.0 | 90.0 | 110.0 | 110.0 | ||
Welded connections | Input a (without connection to the vessel) | Output b | Input a (without connection to the vessel) | Output b | ||||
Center to end face | - | [mm] | 24 | 80 | thirty | 90 | ||
Height - Н4 | H max. | [mm] | 201 | 289 | ||||
Threaded connections | Input a (without connection to the vessel) | Output b | Input a (without connection to the vessel) | Output b | ||||
Center to end face | - | [mm] | 24 | 120 | thirty | 130 | ||
Height - Н4 | H max. | [mm] | 201 | 289 |
Fact. dia. holes d 0 [mm] | 13 | 25 | |||
Body material: 1.4435 (316L) | |||||
Minimum set pressure | p [bar] | 0.3 | 0.1 | ||
Maximum set pressure | p [bar] | 16 | 16 | ||
Temperature range | - | Minimum | Maximum | Minimum | Maximum |
EPDM | [° C] | -45 | +150 | -45 | +150 |
CR | [° C] | -40 | +100 | -40 | +100 |
FKM | [° C] | -twenty | +180 | -twenty | +180 |
NBR | [° C] | -25 | +110 | -25 | +110 |
FFKM | [° C] | 0 | +250 | 0 | +250 |
Fact. hole diameter d 0 | 13 | 25 |
Set pressure [bar] | Throughput [kg / h] | |
1 | 88 | 213 |
2 | 142 | 347 |
3 | 191 | 472 |
4 | 239 | 603 |
Maximum temperature for EPDM soft seal | ||
5 | 286 | 722 |
6 | 332 | 840 |
7 | 378 | 956 |
eight | 425 | 1073 |
nine | 471 | 1191 |
ten | 518 | 1308 |
12 | 611 | 1543 |
fourteen | 701 | 1773 |
16 | 794 | 2007 |
Fact. hole diameter d 0 | 13 | 25 |
Set pressure [bar] | Throughput [m 3 / h] | |
1 | 105 | 254 |
2 | 171 | 418 |
3 | 234 | 576 |
4 | 293 | 741 |
5 | 353 | 892 |
6 | 413 | 1043 |
7 | 472 | 1194 |
eight | 532 | 1344 |
nine | 592 | 1495 |
ten | 651 | 1646 |
12 | 771 | 1947 |
fourteen | 890 | 2249 |
16 | 1009 | 2551 |
Fact. hole diameter d 0 | 13 | 25 |
Set pressure [bar] | Throughput [10 3 kg / h] | |
1 | 2.83 | 7.33 |
2 | 4.01 | 10.4 |
3 | 4.91 | 12.7 |
4 | 5.66 | 14.7 |
5 | 6.33 | 16.4 |
6 | 6.94 | eighteen |
7 | 7.49 | 19.4 |
eight | 8.01 | 20.7 |
nine | 8.5 | 22 |
ten | 8.96 | 23.2 |
12 | 9.81 | 25.4 |
fourteen | 10.6 | 27.4 |
16 | 11.3 | 29.3 |
Delivery
- Pickup from a warehouse in Kiev - is free
- New Mail - at the rates of the delivery service, at the rates of the delivery service, at the rates of the delivery service
- SAT - at the rates of the delivery service
- Deliveri - at the rates of the delivery service
Payment
- Cashless payment with VAT
- Online Privat24, Visa / MasterCard