The control valve is designed to control the flow of gas, vapor or liquid in accordance with directive 97/23 / EC (pressure equipment) and ISO 9001 certification (quality management system).
The valve is two-way, single-seated, direct / reverse acting with a diaphragm-spring pneumatic actuator. The modular design of the valve and a wide range of possible combinations provide various options for the valve configuration.
Connecting sizes: DN15 - DN100
DIN PN25 Ductile iron GJS-400-18-LT (0.7043)
DIN PN25 Bronze RG-10 (EN-1982 CuSn10-CC480K)
DIN PN40 Carbon steel GP240GHN (1.0619)
DIN PN40 Stainless steel CF8M (1.4408)
Valve flow characteristics: linear, equal percentage or OPEN / CLOSE
Standard drive connection.
Flanged connection with sealing face B1 (according to EN 1092-1) On request: threaded BSP or NPT, BW, SW, ...
- Class IV (metal-to-metal seal)
- Class VI (PTFE + GR seat)
Seals on request: PEEK, NBR, EPDM, Stellite seat
Standard double-sided V-ring stem packing
Installation of an anti-cavitator and a noise damper is possible
NAMUR IEC 534.6 connection
Dimensions (mm) and weight (kg)
|Kv (m³ / h)||3.5||5||nine||15||22||35||60||85||130|
|Cv (gallons per minute)||4||5.8||10.4||17.5||25||41||70||100||152|
|A (EN 558-1) (mm)||130||150||160||180||200||230||290||310||350|
|A ANSI150 (mm) inches||○||○||184 7.25 "||-||222 8.75 "||254 10 "||276 10.86 "||298.5 11.75 "||352.5 13.88 "|
|A ANSI300 (mm) (inches)||○||○||197 7.76 "||-||235 9.25 "||267 10.51 "||292 11.5 "||317.5 12.50 "||368 14.49 "|
|L (with AP295) (mm)||345||345||411||411||436||436||470||470||490|
|Valve weight (kg) (without actuator)||5||6||7||eight||12||15||twenty||25||40|
- Pickup from a warehouse in Kiev
- New Mail - at the rates of the delivery service
- SAT - at the rates of the delivery service
- Deliveri - at the rates of the delivery service
- Cashless payment with VAT
- Online Privat24, Visa / MasterCard