Thermodynamic steam trap Yoshitake TD-30NA

1. The bimetallic material solves the air problem and allows the cool condensate or air to be released smoothly at the start of operation, which allows the steam equipment to start efficiently.
2. The stainless steel valve disc and seat are specially heat treated and extremely durable.
3. The valve disc, valve seat and bimetallic material can be replaced in the field without disconnecting the trap from the piping.
4. Easy maintenance and inspection due to simple design: the only removable part is the valve disc.
5. Compact, lightweight and inexpensive. It is applicable in a wide range of working pressures and does not require adjustment.
6. Fits in any direction and is easy to assemble.
7. Trouble-free operation and no steam leaks due to air isolation.
8. Built-in strainer eliminates the need to install a filter in front of the product.
9. Large bandwidth.

TD-30NA

• Product dimensions with JIS 10K FF flanges and products with JIS 20K FF flanges are the same. • The thickness of the JIS 10K FF flanges is the same as the thickness of the JIS 20K FF flanges.

Maximum continuous performance graph

* The bandwidth shown in the graph above is the maximum value. When designing the system, select a steam trap with sufficient safety factor (more than four to five times the normal level). That is, for example, if a throughput of 100 kg / h is required, then select a steam trap capable of discharging from 400 to 500 kg / h.