| Model | GD-9N | ||
| Nominal size | 25A | 8A, 10A, 15A, 20A | |
| Application | Air, non-hazardous liquids | ||
| Inlet pressure | 0.1-1.0 MPa | ||
| Low pressure | 0.05-0.85 MPa | 0.05-0.7 MPa | |
| Operating temperature | 5-60 ° C | ||
| Material | Frame | Aluminium alloy | |
| Valve | NBR | ||
| Valve seat | Brass | ||
| Membrane | NBR | ||
| Relief pressure | Pressure setting +0.05 MPa | ||
| Compound | JIS Rc Thread | ||
| Design | Reset | ||
| Leaking valve seat | No leaks | ||
- The valve is not intended for use on toxic or flammable liquids.
- Available with mounting brackets.
- Available with pressure gauge (6 types).
8A, 10A - outer diameter: 37.5; maximum pressure: 1.0 MPa, 0.4 MPa or 0.2 MPa
15A, 20A, 25A - outer diameter: 42.5; maximum pressure: 1.0 MPa, 0.4 MPa or 0.2 MPa
- The large diaphragm area provides greater control accuracy for high set pressures.
- No external leaks due to lack of oil seals.
- The valve is designed for pressure compensation.
| Nominal size | d | L | H | H 1 | Manometer connection | The weight |
| 8A | Rc 1/4 | 53 | 93.9 | 23.5 | Rc 1/8 | 0.19 |
| 10A | Rc 3/8 | 53 | 110.5 | 27 | Rc 1/8 | 0.34 |
| 15A | Rc 1/2 | 70 | 133.5 | 33.5 | Rc 1/8 | 0.58 |
| 20A | Rc 3/4 | 75 | 135 | 33.5 | Rc 1/8 | 0.6 |
| 25A | Rc 1 | 95 | 171 | 50 | Rc 1/4 | 1.55 |
Flow characteristic curve for all nominal sizes (air: inlet pressure 0.7 MPa)
* There are no restrictions in the values of the minimum regulated flow
Pressure characteristics for all nominal sizes (air: inlet pressure 0.7 MPa, outlet pressure 0.2 MPa, flow rate 20 l / min (standard conditions)
Delivery
- Pickup from a warehouse in Kiev - is free
- New Mail - at the rates of the delivery service, at the rates of the delivery service, at the rates of the delivery service
- SAT - at the rates of the delivery service
- Deliveri - at the rates of the delivery service
Payment
- Cashless payment with VAT
- Online Privat24, Visa / MasterCard
