| vendor code | BWV-T | BWV-ST | BWV-SST | BWE-T | BWE-ST | BWE-SST |
| - | Maximum operating temperature 100 ° | |||||
| Insulation | 530L rigid polyurethane | |||||
| Protection | magnesium anode with thread | |||||
| Pressure | 3 bar | |||||
| Model | 850 / S | ||
| Tank capacity (excluding DHW tank) | l | 895 | |
| Actual volume of hot water in the tank (for models BWE-T and BWW-ST) | l | 190 | |
| Actual volume of hot water in the tank (for model BWE-SST) | l | - | |
| Actual volume of water in the tank (for models BW ET and BWE-ST) | l | 705 | |
| Actual volume of water in the tank (for model BWE-SST) | l | - | |
| D | Insulated diameter | mm | 990 |
| d | Diameter without insulation | mm | 790 |
| HT | Height | mm | 1920 |
| Internal DHW tank (for models BWE-T and BWW-ST) | l | 190 | |
| Internal hot water supply (for model BWE-SST) | l | - | |
| Heating area of the spiral heat exchanger (for models BW ET and BWE-ST) | m2 | 2.0 | |
| Heating area of spiral heat exchanger (for mod .. BW E-SST) | m2 | - | |
| Lower heat exchanger heating area | m2 | 3.0 | |
| Heating area of the upper heat exchanger | m2 | - | |
| Tank weight mod. BWE-T / BWV-T | Kg | 160 | |
| Tank weight mod. BWE-ST / BWV-ST | Kg | 190 | |
| Tank weight mod. BWE-SST / BWV-SST | Kg | - | |
| TO | Maximum tilt height | mm | 2150 |
| Connections | |||
| EU | Inlet-outlet of the heated circuit (DHW) | G1 " | |
| RC | Recirculation | G1 " | |
| So1 | Sensor (on top flange) | G½ " | |
| So2 | Sensor connection | G½ " | |
| Sf | Tank air valve | G½ " | |
| A | Magnesium anode | G1 "¼ | |
| RE2 | Electric heating element for the circuit (DHW) | G1 "¼ | |
| M | Custom tank connections | G1 "¼ | |
| RE | Electric heating element of a tank | G1 "½ | |
| S | Draining from the tank | G1 " | |
| SS1-SS2 | Inlet-outlet of the lower spiral heat exchanger | G1 " | |
| SS3-SS4 | Inlet-outlet of the upper spiral heat exchanger | G1 " | |
| So | Spiral heat exchanger sensor (on casing) | G½ " | |
| Technical details | |||
| PE | Maximum working pressure of the internal DHW tank | bar | 6 |
| PC | Test pressure of the internal DHW tank | bar | nine |
| TE | Max. working temperature | ° C | 100 |
| PES | Maximum working pressure of the tank | bar | 3 |
| PCS | Tank test pressure | bar | 4.5 |
To select the required storage volume, it is possible to combine several tanks into a cascade.
The storage tank is selected for the previously selected heat source and is calculated in such a way that it can accumulate all the heat generated by this source, or for the consumer of which it should be provided with heat generated before the time of heat consumption by a low-power source.
The priority in the selection of the capacity will be the source if its power or the time of heat input is limited.
The priority in the selection of the capacity will be the consumer, if it is required to cover a given heat load in a certain time.
The additional volume of water formed during heating to the maximum temperature is ~ 3.5% of the nominal volume of the container.
- vertical / horizontal placement;
- security group;
- level / temperature / pressure sensors;
- thermoelectric heater;
- heat exchanger;
- insulation in the cold;
- cathodic protection;
- service;
- inspection hatch; leather / fabric cover;
- development of individual equipment *
Delivery
- Pickup from a warehouse in Kiev - is free
- New Mail - at the rates of the delivery service, at the rates of the delivery service, at the rates of the delivery service
- SAT - at the rates of the delivery service
- Deliveri - at the rates of the delivery service
Payment
- Cashless payment with VAT
- Online Privat24, Visa / MasterCard
